Compatibility checking sounds more complicated than it actually is once you know the handful of things that genuinely need to match up. Here's the order we'd do it in.

1. CPU and motherboard socket

The starting point for every build. AMD's current desktop socket is AM5; Intel's is LGA1700 (with a newer socket arriving as that platform matures). A CPU only fits a motherboard with the matching socket, no exceptions, no adapters. Decide on CPU and motherboard together before anything else.

2. Memory type and motherboard support

Once your motherboard is chosen, it will support either DDR4 or DDR5, not both. It will also list a maximum supported memory speed. Buying faster memory than the board officially supports isn't harmful, it'll just run at whatever speed the board actually supports instead.

3. Case, motherboard size, and GPU length

Your case needs to support your motherboard's form factor (ATX, Micro-ATX or Mini-ITX) and needs enough internal length for your graphics card. Both numbers are published in the case's spec sheet, check them against your other parts directly rather than assuming a "full size" case fits everything, since GPU length limits vary case to case.

4. CPU cooler clearance and socket support

Air coolers need to fit under the case's side panel, check the cooler's height against the case's maximum. Coolers also list which sockets they support, most current coolers support both AM5 and LGA1700, but it's worth a direct check rather than an assumption, especially with older cooler models.

5. Power supply wattage

Add up your parts' power draw (or let a tool do this automatically) and compare against your power supply's rated wattage, with headroom. Covered in full in our PSU guide.

Why we built the checker into every page on this site

Doing all five checks by hand, across multiple browser tabs and spec sheets, is exactly the kind of tedious cross-referencing that leads to mistakes. Every time you add a part on GetPCParts, we run these checks automatically against everything else already in your build and tell you immediately if something won't fit, rather than leaving you to discover it when the parts arrive.